7.1Vapor QualityVapor Quality
8.1Manufacturing QualityManufacturing Quality
7.0Temperature FlexibilityTemperature Flexibility
7.0Battery LifeBattery Life
Battery Life1.5 Hours
Heat timeDry - 2 minutes
E-liquid - instant
TemperatureMaximum Temperature 205 (dry herb)
CompatibilityHerbs, E-Juice and Concentrates (with separate cartridges)
Warranty6 months with Toronto Vaporizer, Hassle-Free Warranty
Heat resistant plastic
Key FeaturesMagnetic Swappable Cartridges
Let’s have a look at the V2 Pro Series 7 Portable vaporizer. This is the second, multi-purpose vaporizer from the e-cig manufacturer V2 Pro, offering quick and convenient e-liquid, oil or dry herb vaporization.
Inside the box you’ll find:
- The V2 Pro series 7 vaporizer
- One loose leaf cartridge
- One e-liquid cartridge
- One USB charger
- One wall charger adapter
- One cleaning brush
- One metal pick tool
- Three extra screens
And if you order with us you can also choose to receive a free ZEUS Bolt grinder made of aircraft grade aluminum
The first thing you’ll want to do with the unit is sterilize it. To do that, press the activation button quickly 3 times to unlock the unit. The LED lights around the button and base of the unit will flash white to indicate the unit is unlocked. For sterilization, we recommend changing your unit to the highest temperature setting, so press the button 2 times very quickly to put the Series 7 into ‘temperature mode’. The unit will then begin to ‘cycle’ through the 3 temperature settings as the LED lights below the button light up in sequence to indicate this. The LED closest to the button indicates the highest heat setting so when the light cycles to that temperature, just press the button to select it. Then, press and hold the activation button for 4 seconds to activate heating. Let the unit heat up as the LED light at the base of the unit turns from red, to yellow to green. Once the LED is set on green, let the series 7 sit and run through a full cycle. After 150 seconds the auto cut-off will engage and put the unit to sleep. Simply repeat the process 2-3 more times to complete the sterilization. This will get rid of any of the manufacturing oils that may have gotten inside the unit as a result of putting it together.
Once you’ve done that, you’re ready to load your unit with freshly ground botanical.
To grind up your botanical we always recommend using the ZEUS bolt grinder. The bolt grinder has been calibrated to grind up your botanical to the perfect consistency for vaporization. That means its fine enough to be properly vaporized inside of your unit, but not so fine that it fly’s through screens.
To load your loose leaf cartridge, twist the mouthpiece counter clockwise and take it off. Using your fingers or the metal tool provided, load freshly ground botanical into the heading chamber without over filling. Just put the mouthpiece back on, and you are ready to vaporize!
To load the e-liquid cartridge, remove the mouthpiece and screw off the e-liquid cap. Slowly and carefully drip your e-liquid into the cartridge and onto the wicks, careful to not get any inside the metal core or overfill the cartridge. Just put the cap and mouthpiece back on and you are ready to vaporize!
Temperature and Voltage
The V2 Pro Series 7’s loose leaf cartridge has 3 temperature settings as indicated by the 3 LED lights located under the activation button. To toggle between these temperature settings, just double click the activation button to put the series 7 into temperature mode. When the LED furthest from the button is lit white, it means the unit is set at 200 degrees Celsius. When the middle LED is lit white, it means the unit is set at 210 degrees Celsius and when the led closest to the button is lit white, it means the unit is set at 225 degrees Celsius. To select your temperature, just press the button 1 time. For best results we recommend vaporizing between 190- 210 degrees Celsius, which is either level 1 or level 2.
The V2 Pro Series 7’s e-liquid cartridge has 3 voltage settings, also indicated by the 3 LED lights located under the activation button. To toggle between these voltage settings, just double click the activation button to put the series 7 into voltage mode. When the LED furthest from the button is lit white, it means the unit is set at 3.7voltages. When the middle led is lit white, it means the unit is set 4.2voltages and when the led closest to the button is lit white, it means the unit is set at 4.7voltages. To select your voltage, just press the button 1 time.
Once you’ve selected your temperature or voltage, the LED temperature indicators will flash white. Press and hold the button to activate heating and the LED at the bottom of the unit will glow red, then yellow, and when the when the LED is lit green, the unit is ready. This unit heats up really fast and should be ready in just about 20 seconds.
To wrap this unit up, I’d like to tell you guys about some of the impressive features of the V2 Pro Series 7 vaporizer that make it such a great unit.
Optimized for Loose Leaf
The first is herb optimization. While this unit offers 3in1 versatility, with 2 of those tanks out of the box, this unit is really optimized for loose leaf. Easy to load, mess free, optimal pre-set temperature settings and an industry leading heat up time of 30 seconds, this unit is calibrated not only for convenient but also ultra fast vaporizing on the go.
The second is the Series 7 smart technology. The series 7’s cartridges use what the manufacturer calls smart technology to communicate with the device the optimal pre-set temperatures or voltages to vaporize at, based on the individual cartridge installed. This smart technology is very innovate and unique, really taking the guess work out of choosing what temperatures are best for whatever material you are using.
The third is general convenience factor of this unit. This unit couples a 1 button design with smart technology, 3 different magnetic tank options and a magnetic charger, to make every aspect of using the 7 series a total breeze. From turning the unit on to swapping out your tanks to charging – the process is quick and painless, and very convenient when on the go.
The V2Pro series 7 is a great portable for those who are looking for a convenient and versatile unit, with the ability to seamlessly switch between different cartridges and vaporize a variety of materials, whatever your preference is!
I’m HollyJane for TorontoV TV. We hope you enjoyed this video and we hope you found it useful. And for all you connoisseurs out there, keep vapin!
In the box
Add a review
-Works great but needs some improvement.
-Mouth piece needs a redesign, it comes off to easily on the herb cartridge, if you put it in your pocket the tip can come off and you have a pocket ful of herb.