So I thought I write this review because at first the xtruder didn't seem to be working as well as I saw everywhere on social media and in videos. After a few days and playing around with it, I noticed that the humidity of the herb is key. So if the herb is humid and sticky it does worse than dryer and whatever stickiness level.

I looked and in the manual it states as well that the humidity should be less than 50, which is in line with some boveda or generally humidity packs. So make sure you dry out your herb if you dont have proper storage. If you buy from legal outlets of herb, mostly they are in line with the correct humidity for the device to work well.

my average time is like 30 seconds to get the first pod filled and about 10 seconds for each subsequent pod, if the herb is in line with the optimal humidity levels. My herb I had to leave out to dry for 1 hour or so before it fell in line with the right consistency for a grind.

The Zeus itself is great, but man is this herb mill a complete dud. Your herb *will* get stuck in this enormous dildo, and while you wait for even one pod to get filled up, you could have just used a grinder (hold upside down for a few twirls to get it extra fine) and pack a bunch of pods using a chopstick let's say to pack it tightly. Without this giant ugly useless thing, the box that holds everything could be 66% smaller.

It broke after 2 months of use... don't grind your herbs until they are completely dry otherwise it get stucked in and may even break as mine did. Better use a conventional grinder and fill your pods with a stick.

I wish this were metal, because trying to use a different grinder to fill the Arc pods would be a pita. However, I do use my screw gun/drill with a 5/16" hex driver to run this grinder, and it really speeds up the process. Take off the lid, and the metal hex at the top fits a 5/16" hex head. Just be careful, as everything is plastic, so you cannot go full speed.

I got it with my Zeus, so I guess I can't complain too much... On the plus side, the grind is perfect, and it fills the arc pods very nicely.
My biggest beef with it is just how excruciatingly LONG it takes to fill a pod. Expect to spend a full 10 minutes turning it to fill a single, tiny pod. Want to fill a bunch? Settle for like 2 hours of mind-numbing grinding. It's ridiculously inefficient. As an added bonus, some weeds will just stick to the cheap plastic blades and form a dense mass in numerous places. If you open the thing up, expect to find about a third of your herb stuck like this. Fortunately it is very easy to open and clean.
My advice: get another grinder, unless you want to spend hours grinding and hurt you wrist doing it.

Have only used a few times, but seems easy and effective

I've watched the videos on YT and this works exactly as advertised when used alongside the Zeus ArcPods. One of the most convenient herb mills I've had the pleasure of using and the build quality makes me feel like it will last