Crossing Core XL Joystick Atomizer
About Crossing Core XL Joystick Atomizer
The Crossing Core XL Joystick Atomizer is a replacement heating chamber for the Core XL e-rig. The design implements a 3D ceramic cup in a stainless steel housing. It heats from both the bottom and the sides, not just the bottom, and includes a flexible joystick carb cap that lets you direct airflow throughout the entire cup. You can also fully rebuild it, so you only need to swap a coil instead of throwing away the entire atomizer.
Product Questions
Technical Specs
- Brand SZ CROSSING
- Country of Production China
- Materials Ceramics
- Type Heating Chambers
Customers also viewed
Additional information about Crossing Core XL Joystick Atomizer
Table of Contents
- You Should Buy the Core XL Joystick Atomizer If…
- How to Rebuild the Atomizer
- What the Joystick Cap Actually Does
- Bottom and Side Heating
- Compatibility
You Should Buy the Core XL Joystick Atomizer If…
You should buy the Core XL Joystick Atomizer if your current chamber heats unevenly or tastes off, or if you'd rather run a rebuildable atomizer where a worn heater costs you a coil instead of the whole unit.
How to Rebuild the Core XL Joystick Atomizer
Rebuilding is what sets this atomizer apart from a sealed one, and it needs no tools. Here is a step-by-step guide:
- Power off your device and let the atomizer cool completely before handling it.
- Pull the gold pin out from the bottom of the atomizer.
- Unscrew the top of the housing and lift the old heater out.
- Thread in a fresh Core XL coil, reassemble the housing, and reseat the pin.
What the Joystick Cap Actually Does
The joystick is a flexible carb cap that allows you to control where airflow is concentrated. Airflow control helps you heat your material consistently and use it fully, instead of letting it pool due to uneven heat distribution. Terp pearls also work well with the Joystick cap. Combined with the 3D ceramic chamber, the Joystick cap ensures optimal, efficient heating and airflow.
Bottom and Side Heating in the Crossing Core XL Cup
E-rig atomizers commonly heat up from the bottom floor of the bucket, meaning your material is used only when it touches the bottom of the bucket and not the sidewalls. The 3D chamber addresses this issue by heating both the bottom and the sides, so you use all your material once it enters the chamber. When paired with the larger XL cup and the Joystick cap, you’ll get more efficient vaporization, less mess, and more capacity for larger doses.
Compatibility
- a href="https://tvape.com/crossing-core-xl-e-rig.html">Crossing Core XL
- Crossing Tug 2.0
- Crossing Core 2.0
- Crossing Core 2.1
Customer Reviews
Related Products
