The Core 2.1

Additional information about The Core 2.1

The Core 2.1 and 2.0 were created by listening to customer feedback on the original Core. The newest version features 4 temperature settings that are indicated by a color. If you set your desired heat setting to Blue, this will include a 12.5-second pre-heat and approximately 205°C (401°F), the Green at 13-second preheat time runs at approx. 220°C (428°F), the White at 17.5 seconds preheat time runs at approx. 240°C (464°F) and finally the Red at 22.5 second pre-heat time and runs at approx. 260°C (500°F). Starting the Core 2.1 while it's cold is an option but we recommend always pre-heating and using your wax once your device is hot.

You should get the Core 2.1 E-Rig if…

You are looking for a new and improved version of the Core 1.0 that runs on V5 heaters instead of wire based coils. Not to mention the decreased preheat time and increased session time. Overall the Core 2.1 is simply a higher quality device since Shenzhen Crossing took into consideration customer feedback from the previous versions.

Crossing Core 2.1 E-Rig features improved button function

One button functionality which makes it very simple to use. 2 Click will start session mode, 3 Clicks will change the desired mode, 4 clicks will give you a battery indicator and 5 clicks will either lock or unlock your device. You can also hold the button for manual fire, best used to get the most out of your wax by pressing and holding for an extra 3-5 seconds at the end of your session.

Non Rebuildable 3D Atomizer

The Core 2.1 as previously mentioned features a Non rebuildable 3D Atomizer which will provide a much higher overall quality. It also removes the need for the tools required to dismantle and put together the Atomizer. Shenzhen Crossing understood that most consumers look for relaxation when vaporizing and the extra hassle is simply not worth it.