Ispure Daab Kit Water Chamber

Additional information about Ispure Daab Kit Water Chamber

Table of Contents

• You Should Buy the Ispire Daab Kit Water Chamber If…
• How to Replace the Ispire Daab Kit Water Chamber
• One Piece of Glass From Cup to Mouthpiece
• Filling to the Line and Drawing Gently
• Compatibility

You Should Buy the Ispire Daab Kit Water Chamber If…

Your current chamber is cracked, chipped, or clouded with residue that soaking no longer removes. A chip on the carrier cup rim is reason enough on its own, since the carb cap needs that rim to sit flat. A spare also lets one chamber soak in alcohol while you use the other.

How to Replace the Ispire Daab Kit Water Chamber

Your concentrate cup and carb cap move over to the new chamber. Here is a step by step guide:

• Click the fire button five times quickly to turn the Daab off, and let the glass cool. Remove the carb cap and the concentrate cup, then lift the old chamber off the base.
• Pour water into the new chamber through the mouthpiece up to the fill line.
• Set the chamber on the base so the carrier cup sits down in the induction area and the magnetic connection holds it. On older kits with a separate reclaim cup, place it in the induction area first.
• Drop the concentrate cup into the carrier cup and set the carb cap over it. When you turn it on, the base light flashes red until it senses the cup; if it keeps flashing, reseat the cup.

One Piece of Glass From Cup to Mouthpiece

The carrier cup is the part of the chamber that holds the concentrate cup, and the two are made together as one glass piece. It sits in the base's induction area, holds the concentrate cup and gives the carb cap a rim to sit on. With cup and chamber as one piece, the path from the concentrate cup to the mouthpiece is fully made of glass, which Ispire calls its all-glass airflow path. The metal which the base heats is sealed inside the concentrate cup, so a new chamber replaces that glass path without changing how the Daab heats.

Filling to the Line and Drawing Gently

Fill the water chamber to the marked fill line. That's enough water for vapor to bubble through and cool your vapor while leaving room between the waterline and the mouthpiece. Overfilling decreases that room and brings water closer to your mouth on a hard pull. Inhale gently so oil from the cup isn't drawn into the chamber.

Compatibility

• Ispire Daab Kit E-Rig (also sold as the Ispure Daab Kit)