Crossing Replacement O-Rings for the Titanium Hybrid Matrix Injector Chamber
About Crossing Replacement O-Rings for the Titanium Hybrid Matrix Injector Chamber
These replacement silicone O-rings are for Crossing Technology's Titanium Hybrid Matrix Injector Chamber and come in packs of four. Insert the O-rings between the glass post and the titanium bowl to create an airtight seal for proper airflow. Over time, heat, cleaning solutions, and regular use will harden and wear down the O-rings, so they're meant to be replaced rather than be a permanent part of the bowl.
Product Questions
Technical Specs
- Brand SZ CROSSING
- Country of Production China
- Type Parts Sets
Customers also viewed
Additional information about Crossing Replacement O-Rings for the Titanium Hybrid Matrix Injector Chamber
Table of Contents
- You Should Buy These Replacement O-Rings If…
- How to Replace the O-Rings
- Why Worn O-Rings Put Your Glass Post at Risk
- Compatibility
You Should Buy These Replacement O-Rings for the Titanium Hybrid Matrix Injector Chamber If…
You should buy these replacement O-rings if your draw has gotten loose or airy, if your glass post is getting harder to pull out than it used to be, or if you want spares on hand since they wear out on a schedule rather than failing suddenly.
How to Replace the O-Rings for the Titanium Hybrid Matrix Injector Chamber by Crossing Technology
The swap itself takes under a minute once the glass post is out of the bowl. Here is a step-by-step guide:
- Grip the glass post and the bowl firmly and pull them steadily apart, straight down without wiggling or twisting.
- Remove the old O-rings, you can use a dab tool to work them out if they've hardened in place.
- Seat the new O-rings.
- Reinsert the glass post into the bowl and check that the draw feels sealed again.
Why Worn O-Rings Put Your Glass Post at Risk
The condition of your O-rings can make the glass post hard to remove, leading people to wiggle or twist it while pulling it out, which can snap the post. As a result, when your O-rings harden or get dried out, the glass post is more prone to breaking. Having replacement O-rings on hand not only helps to maintain seal quality, but it also lowers the risk of breaking your glass post.
Compatibility
- Crossing Technology Titanium Hybrid Matrix Injector Chamber