Available for Pre-Order, expected to ship in January
The Pulsar APX dry herb vaporizer is stylish and super portable featuring 5 pre-set temperature settings and a large ceramic heating chamber. It's one button design guarantees a hassle-free session.
6.3Vapor QualityVapor Quality
6.6Manufacturing QualityManufacturing Quality
7.3Temperature FlexibilityTemperature Flexibility
6.5Battery LifeBattery Life
Battery Life1 hour
Heat time40 seconds
Temperature180C. 190C, 200C, 210C, 220C
Warranty6 months with Manufacturer
VersionsLatest (February 2017)
MaterialsCeramic Heating Chamber
Key FeaturesSlim Design
5 Pre-Set Temperatures
Let’s have a look at the Pulsar APX Herb Vaporizer. This unit is small, discreet and offers user 5 temperature settings to provide satisfying vapor.
Inside the box you’ll find: the Pulsar APX Herb Vaporizer, 1 usb charging cable, 5 screens, 1 cleaning brush, 1 packing tool, 1 set of tweezers, 1 wax canister, and if you order with us you can also choose to receive a free ZEUS Bolt grinder made of aircraft grade aluminum.
The first thing you’ll want to do with the unit is sterilize it. To do that, press the power button on the front of the unit 5 times quickly to turn on the unit. Next press and hold the power button to increase the temperature to the next highest setting. Repeat this step until you have reached the highest temperature which is 428 degrees Fahrenheit. Once set the unit will begin to heat, so let the unit sit and run through a full cycle. After 5 minutes, the Pulsar APX will go into sleep mode, to re-engage the unit hold the power button for 3 seconds to start heating again. Repeat this process 3 more times to complete the sterilization. This will get rid of any of the manufacturing oils that may have gotten inside the unit as a result of putting it together.
The Pulsar APX vaporizer has 5 temperature settings as indicated by the 5 LED lights on the top of the unit, which can be toggled between by pressing and holding the power button. When the lowest LED is lit the unit is set at 356F, when the second light is lit, the unit is at 374F, 3 is 392F, 4 is 410F and 5 is 428F. For best results we recommend vaporizing between 374F- 410F degrees Fahrenheit, which is between level 2 and level 4.
To wrap this unit up, I’d like to tell you guys about some of the key features of the Pulsar APX that make it such a stellar unit. The first is the Pulsar APX’s portability. This unit stands 10.5cm tall and 3cm wide making it extremely portable. It can easily be stored in a pocket, purse or ZEUS Armor case for easy transportation. The second is the Pulsar APX’s ease of use. This unit features just one button and 5 easy to access temperature settings. It’s simple to load, clean, charge and its user-friendly functionality makes it a great vaporizer for both beginners and true connoisseurs alike. The third is the Pulsar APX’s temperature flexibility. This unit features a 5 pre-set temperatures ranging from 356F to 428F giving users the ability to control the type of vapor they prefer. With such a large range it will definitely satisfy most users’ preferred vapor profile.
The Pulsar APX is a great unit for those looking for an easy to use, high-value vaporizer that’s offers efficient, satisfying vapor every time. I’m Sarah for TVape TV. We hope you enjoyed this video and for all you connoisseurs out there, keep vapin!
Pulsar APX Herb Cleaning Video
What’s up guys, this is Mike for TVape TV. Solid choice getting the Pulsar APX Herb Vaporizer! Let’s go over some quick cleaning tips to ensure you get tasty vapor with this unit, every time. First, we’ll go over the materials you’ll need, then we’ll get into cleaning and maintenance.
1) Materials Needed
Before you start cleaning your Pulsar APX, make sure you have:
- The ZEUS Purify cleaning solution; diluted 40% with water
- Fresh water
- Paper towels
- ZEUS grime sticks
- ZEUS Bristle Pipe Cleaners; and
- The cleaning brush that comes with your Pulsar APX
The Pulsar APX is really easy to clean; all you need to do is care for the heating chamber and mouthpiece.
To clean the heating chamber, take a ZEUS grime stick, snap the top, let the alcohol drain to the bottom and swab the inside. To ensure no alcohol particles are left behind, turn the unit on after letting it sit for a few minutes, set it to the highest heat setting and let it run through a couple heating cycles.
You can clean the mouthpiece by taking it apart and soaking all the pieces in a jar of your diluted ZEUS Purify Solution, for about half an hour. Then use the ZEUS bristle pipe cleaners to dislodge any remaining particles. Next, rinse and towel dry.
For good care, we recommend you brush out your heating chamber after each use with your APX cleaning brush. This’ll help get out any extra particles and prep your Pulsar APX for your next sesh. In terms of maintenance, we recommend replacing the screens every month or so for maximum airflow. And that’s it!
We hope you enjoy your Pulsar APX and thanks for watching! If you have any questions, don’t hesitate to give us a shout. Cheers and as always, keep vapin’!
In the box
Add a review
The chamber/mouthpiece are poorly designed as the screen will almost always be resting on top of the herb making it have to be cleaned even more frequently. It’s not hard to clean (just take the screens out and put it and the mouthpiece in alcohol for awhile) but the screens get gummed up after only a couple of uses making it very difficult to use.
I find the battery life leaves something to be desired. I’ve never actually counted how many vape sessions I’ve gotten out of a charge, but it seems like I have to charge it all the freaking time, which is annoying when you just want to vape. I find myself resorting to my glass lot more because of the bad battery life.
All that said, it’s not terrible, if you’re like me and you want to vape but truly cannot afford anything better, it does what it’s supposed to (as long as it’s perfectly clean), but you really do get what you pay for.
I find it a pain to clean after each use. The screen becomes clogged very quickly, and while it comes with extra screens it is just an inconvenience I would like to see it remedied. Perhaps the proximity of the screen to the heating chamber is the culprit here. Not sure if this is only true for this model or if it's just the price you pay for using this type of device. Either way, I find it annoying to have to figure in cleaning so often.
It can feel warm to the touch after a few minutes use. Not uncomfortably so but definitely noticeable.
I will in all likelihood upgrade in the coming weeks. For now, this has been a good introduction to vaping. Can't see myself going back to pipes and rolling
Mouth piece needs to be cleaned often to fully enjoy draws but it is easy to clean with isopropol.
A conduction based vape but the element is too close to the chamber where heat transfer burns the herb. The proximity of heat, and the burning, effects the flavour of the vapour and can cause high temps to reach mouth.
Very portable. Easy button use.
There are two things you need to know about this vape though.
1st: The mouthpiece mod. When you unscrew the metal screen holder thing in the mouthpiece to clean it you'll notice that there's two screens in there with a spacer.....just take the top one out. It doesn't let any herb through but it drastically improves flow rate (idk why they even tried to put two in there). Just do this as soon as you open the box. It makes it flow like a PAX :P
2nd: The only real complaint I have is the vapor chamber is really close to the mouthpiece and can get hot if you really push it hard (it does that with or without the mod). There should be an extended mouthpiece or something to help cool it a bit
9/10 would buy again if I lost mine. Just wish I knew about the cool coloured ones before I got a plain black one :P
Loosely pack this one.
Very easy to use and clean.